split tube furnace (1-5 heat zone)

Model:

Description:Split tube furnace (1-5 heat zone) is suitable for lab experiments, such as, nano material, chemical analysis, component test, metal sintering etc. According to the concrete requirement, the furnace can be equipped with, gas mixer, flow meter and vacuum system.

Introduction:

1.Features of spilt tube furnace :

1. Operation Temperature: 1100°C ( 1200°C for short time).
2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
3. Heavy duty double layer structure with cooling fan. Lower teperature in outside case.
4. PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
5. Power control with 30 segments programmable.

Technical parameters

Working Temperature	1100 °C (continuous)
Maximum Temperature	1200°C(Can be customized according to your needs.)
Temperature Control	30 steps programmable and PID automatic control
Heating Rate	0~15°C/min (suggestion: ≤10°C)
Heating Elemnt	Fe-Cr-Al resistance wire
Working Voltage	AC 220V, Single Phase, 60/50 Hz (or according to your requirement)
Max. Power	2.5KW

We have a wide range of different optional function furnace to meet different heating requirement, also we accept customer design furnace R&D working, please email us your specific requirement, we will recommend most reasonable choice for you, thanks!

prev：none
next：none

Copy right 2012 Kejia Furnace Co.,Ltd

Friendship link：High Vacuum Tungsten Furnace,