1700℃ vacuum furnace with water cooling

Model:KJ-V1700-275L-IC

Description:Kejia vacuum furnace is widely used for heating treatment of metal materials in low vacuum, recursive, protective atmosphere, also can be used for heating treatment of special materials, such as carbonization process of carbon products. The furnace chamber is ceramic fiber with excellent thermal insulation; Vacuum Reservoir with water cooling system

Introduction:

Features of vacuum furnace with water cooling：

1. Operation Temperature: 1500℃,(1600℃ for short time);

2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.

3. Heavy duty double layer structure with cooling fan. Lower temperature in outside case.

4. PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).

5. Power control with 30 segments programmable.

6. Widely used in the heat treatment of metallic material in coarse vacuum, in reducibility or protective atmosphere.

7. Can also be used for special heat treatment of materials, such as carbon products in the development process of carbonation.℃℃℃

Descriptions

Model	KJ-V1700-275L-IC
Chamber Size (mm)	650x650x650
Working Temperature	1500℃
Max. Temperature	1600℃
Cooling mode	Water cooling
Temperature Accuracy	+/-1℃
Temp. Control	30 steps programmable and PID automatic control
Heating Element	MoSi2 heating element
Limit Vacuum Degree	15pa ~ 10(-3)Pa
Pressure rising rate	≤10-20pa/h
Max. Power	8 KW
Working Voltage	AC 220V, Single Phase, 60/50 Hz (or according to your requirement)

can be customized according to customers’requirements.

Copy right 2012 Kejia Furnace Co.,Ltd

Friendship link： High Vacuum Tungsten Furnace, Customized Furnaces, sitemap